Department of Defence Interview Questions 2026: Examples by Role and Level (APS 6, EL1, EL2 and SES Band 1)
Defence Is the Largest Employer in the APS. Its Panels Are Looking for Delivery, Judgement and Integrity.
The Department of Defence employs more APS staff than any other agency, working alongside members of the Australian Defence Force across capability acquisition, strategic policy, estate and infrastructure, ICT and cyber, finance, people services and intelligence. Defence advertises APS 6 to SES roles in Canberra and across every state and territory, and the volume of vacancies makes it one of the most common targets for experienced APS candidates.
Volume does not mean easy. Defence panels assess candidates on evidence of how they deliver, how they manage risk, and how they work in an environment where civilian and military leadership, security requirements and public accountability all intersect.
This guide gives you example Defence interview questions for APS 6, EL1, EL2 and SES Band 1, explains what each question is really testing, and covers role-specific questions for acquisition, policy, estate, ICT, people and finance roles. If you have read our ATO interview questions guide, the structure will be familiar. The Defence context is not.
Application review. The panel assesses your resume and pitch or selection criteria responses against the job requirements.
Shortlisting. The panel decides who progresses. Defence aims to complete this stage within a couple of weeks.
Assessment. Usually an interview, but Defence may also use work simulations, assessment centres, technical tests, aptitude tests or online psychometric testing, depending on the role.
Referee reports. These may be collected before or after the interview.
Recommendation and merit pooling. The panel recommends the most suitable candidate. Other suitable candidates may be merit pooled, and Defence may share pooled candidates with other areas of Defence or other Commonwealth agencies for similar roles.
Two practical points catch candidates out. First, Defence notes that shortlisted applicants may get as little as two working days’ notice of interview details where possible, and candidates are assumed to be available from the closing date. Preparation needs to start when you apply, not when you get the call. Second, almost every Defence role requires you to be an Australian citizen and to obtain and maintain a security clearance at the level stated in the job pack. Clearance requirements and timeframes are worth understanding before you reach interview.
Delivering results: managing projects, programs, contracts and services to time, budget and quality.
Risk, governance and compliance: applying frameworks such as the Commonwealth Procurement Rules, the PGPA Act and Defence security policy with sound judgement.
Working relationships: building trust with ADF members, industry, other agencies and international partners.
Communicating with influence: briefing senior civilian and military leaders clearly and concisely.
Leadership and people: leading mixed teams of APS staff, ADF members and contractors.
Integrity: handling classified information, managing conflicts of interest and probity, and applying the APS Values alongside the Defence Values of Service, Courage, Respect, Integrity and Excellence.
Integrity questions carry particular weight at Defence because of the scale of public money involved, the sensitivity of the information, and the closeness of the relationship with industry.
What 2026 Context Should Defence Candidates Know?
Panels at EL1 and above increasingly expect candidates to understand the environment Defence is operating in. You do not need to be a strategy expert, but you should be able to connect your experience to what Defence is trying to achieve. Three developments are worth knowing:
The 2026 National Defence Strategy. Released in April 2026 alongside a refreshed Integrated Investment Program, it builds on the 2024 strategy and keeps the focus on deterrence, self-reliance, a stronger sovereign defence industry and regional partnerships.
The Defence Delivery Agency. Announced in December 2025, it brings together the Capability Acquisition and Sustainment Group, the Guided Weapons and Explosive Ordnance Group and the Naval Shipbuilding and Sustainment Group, with a staged transition from 2026. Candidates for acquisition and sustainment roles should expect questions about delivering through organisational change.
Delivery at pace. Across Defence, the expectation is faster capability delivery with strong accountability. Questions about managing schedule pressure, risk and industry performance reflect this.
Read the strategy summary and your target group’s public information before the interview. A single well-placed connection between your example and Defence’s priorities can lift an answer.
What Interview Questions Are Asked at Defence APS 6 Level?
APS 6 officers at Defence work with considerable independence, manage their own projects or workstreams, provide advice to EL staff and senior ADF officers, and often supervise junior staff. Questions test whether you can deliver complex work reliably within governance frameworks.
Example questions
“Tell us about a time you managed a project or task with competing stakeholder requirements and a fixed deadline.”
The panel is testing planning, prioritisation and stakeholder management. A strong answer shows how you clarified requirements, sequenced the work, managed trade-offs, kept stakeholders informed and delivered. State the outcome and what it enabled.
“Describe a situation where you had to apply policy, legislation or a governance framework to a complex or unusual case.”
Defence runs on frameworks. Panels want to see that you understood the rule, recognised where the situation did not fit neatly, sought advice where appropriate, and reached a defensible decision. Show your reasoning, not just the result.
“Give us an example of when you worked with people from a different organisational culture to achieve a shared goal.”
At Defence this often means working with ADF members, whose rank structures, posting cycles and ways of working differ from the APS. Strong answers show respect for those differences and practical adaptation, such as adjusting how you brief or planning around postings.
Other APS 6 questions you may face:
“Why do you want to work at Defence, and how does this role contribute to Defence capability?”
“Tell us about a time you identified and managed a risk in your work.”
“Describe how you have prepared a brief or submission for a senior audience.”
“How have you handled sensitive or classified information in your work?”
What Interview Questions Are Asked at Defence EL1 Level?
EL1 roles at Defence usually involve leading a team, managing a significant workstream, budget or contract, and providing advice that shapes decisions by EL2, SES and senior ADF officers. Panels shift from assessing personal delivery to assessing how you lead others and manage risk.
Example questions
“Tell us about a time you led a team made up of people with different employment arrangements, such as APS staff, ADF members and contractors.”
This is a distinctly Defence question. Panels want to see that you understand the different accountabilities, motivations and constraints of each group, set clear expectations, kept the team cohesive and managed any tensions fairly.
“Describe a time you had to manage a contractor or industry partner who was not delivering to expectations.”
Here is how the difference between levels often shows up:
An APS 6 answer describes identifying the delivery gap, documenting it, raising it with the supplier and escalating to the contract manager.
An EL1 answer describes diagnosing the root cause, using the contract levers appropriately, negotiating a remediation plan, managing the risk to capability and schedule, keeping senior stakeholders informed, and protecting probity and the relationship throughout.
“Give us an example of when you had to make a decision with incomplete information and significant consequences.”
The panel is testing judgement and accountability. Show how you gathered what information you could, assessed the risks of acting and not acting, consulted where appropriate, made the call, and monitored the outcome.
Other EL1 questions you may face:
“How do you ensure your team complies with security and governance requirements without slowing delivery?”
“Tell us about a time you managed a performance issue in your team.”
“Describe how you have briefed a senior ADF officer or SES officer on a complex issue.”
“How have you kept a team focused and productive through organisational change?”
What Interview Questions Are Asked at Defence EL2 Level?
EL2 roles at Defence typically involve leading a directorate or section, owning major programs, contracts or budgets, and advising SES and Star-ranked officers. Panels assess strategic judgement, organisational leadership and the ability to deliver complex outcomes across groups and services.
Example questions
“Tell us about a time you delivered a complex program or initiative that required coordination across multiple groups, services or agencies.”
The panel is testing your ability to deliver through others at scale. Strong answers explain the governance you put in place, how you aligned stakeholders with different priorities, how you managed interdependencies and risk, and what was ultimately delivered.
“Describe a time you identified a significant risk to capability, budget or reputation and how you managed it.”
EL2s are expected to see risks early and own them. Show how you identified the risk, assessed its likelihood and consequence, briefed up with options, implemented mitigations and tracked the outcome.
“Give us an example of when you led change that was resisted by your team or stakeholders.”
Change is constant at Defence, including the current reforms to acquisition and sustainment. A strong answer explains why the change mattered, how you built support, how you handled resistance respectfully, and what lasting improvement resulted.
Other EL2 questions you may face:
“How do you make sure your directorate’s work supports Defence’s strategic priorities?”
“Tell us about a time you had to give frank advice that a senior leader did not want to hear.”
“How have you developed capability and succession in your team?”
“Describe how you have managed probity or a conflict of interest in a procurement or industry engagement.”
What Interview Questions Are Asked at Defence SES Band 1 Level?
SES Band 1 recruitment at Defence is more intensive. Processes commonly involve a senior panel, detailed written application, leadership or psychometric assessment, and sometimes a presentation or strategic exercise. Panels assess enterprise leadership against the APSC’s SES performance expectations.
Example questions
“Tell us about a time you set strategic direction for a large organisation or function and translated it into delivery.”
The panel is testing strategic leadership and execution. Strong answers move from the strategic problem, to how you shaped the direction with others, to how you built the plan, governance and accountability, to the measurable results.
“Describe how you have led in an integrated civilian and military environment.”
Defence SES officers lead alongside, and often jointly with, Star-ranked officers. Panels look for an understanding of shared accountability, respect for military command, and the ability to build trusted partnerships across the civil-military divide.
“How have you managed a high-profile issue involving a Minister, Parliament or public scrutiny?”
This tests political awareness, integrity and composure. Panels want to see frank and fearless advice, sound preparation for Senate Estimates or ministerial engagement, and accountability when things go wrong.
Other SES Band 1 questions you may face:
“What do you see as the biggest workforce or delivery challenges facing Defence?”
“How do you build a culture of accountability and psychological safety in a large division?”
“Tell us about a time you made an unpopular decision in the interests of the broader organisation.”
“How have you worked with industry at a senior level while protecting probity?”
What Interview Questions Are Asked for Popular Defence Roles?
Beyond level-based questions, Defence panels ask role-specific questions linked to the job pack. These examples reflect the capabilities commonly listed in Defence roles.
Capability Acquisition, Sustainment and Project Management (APS 6 to EL2)
“Tell us about a project you managed and how you tracked schedule, cost and risk.”
“How have you managed the transition of a capability from acquisition into sustainment?”
“Describe how you have worked with engineering, logistics or technical specialists to resolve a delivery issue.”
Procurement and Contract Management (APS 6 to EL2)
“How do you apply the Commonwealth Procurement Rules to achieve value for money?”
“Describe a contract dispute or variation you managed and the outcome.”
“Tell us about a time you protected probity in a procurement process.”
Strategic Policy and Industry (APS 6 to EL2)
“How would you prepare advice for the Minister on a defence policy issue with international implications?”
“Tell us about a time you analysed a complex strategic issue and made recommendations.”
“How have you engaged industry to inform policy development?”
Security, Estate and Infrastructure (APS 6 to EL2)
“Describe how you have managed a major infrastructure or estate project with multiple stakeholders.”
“How have you balanced security requirements against operational needs?”
“Tell us about a time you managed a WHS or environmental risk.”
ICT, Cyber and Digital (APS 6 to EL2)
“Tell us about a technology project you delivered in a secure or classified environment.”
“How do you explain technical risk to non-technical senior leaders?”
“Describe how you have managed vendors in a complex ICT program.”
People, Finance and Corporate Services (APS 6 to EL2)
“How have you delivered HR or finance services to a large, dispersed workforce?”
“Tell us about a time you improved a corporate process while maintaining compliance.”
“Describe how you have supported senior leaders with budget or workforce planning.”
How Should You Structure Your Defence Interview Answers?
STAR-L: Situation, Task, Action, Result, Learning. The learning step is especially valuable at EL1 and above.
Defence-specific principles:
Avoid unexplained acronyms. Defence is acronym-heavy, but panel members may come from a different group or service. Spell out anything that is not universal.
Protect classified information. Describe situations at an unclassified level. Discretion is itself evidence of good judgement.
Quantify where you can. Budgets, contract values, team sizes, schedule improvements and risk reductions make Defence answers concrete.
Use “I”, not “we”. Defence work is team-based, but the panel is assessing you.
Pitch to the level. Check the Work Level Standards and make sure your examples show the complexity and leadership expected.
What Are the Most Common Mistakes in Defence Interviews?
Waiting for the interview invitation to prepare. With short notice periods, late preparation shows.
Drowning answers in acronyms and jargon. Clarity scores better than insider language.
Describing military or team achievements rather than your own. Former ADF members in particular should translate unit outcomes into individual actions.
Ignoring governance and probity. Answers about speed or results that skip over compliance raise concerns.
Pitching below the level. EL candidates who give strong APS 6 answers often miss out.
Not knowing the strategic context. At EL1 and above, a basic understanding of the National Defence Strategy and your target group’s role helps.
Sharing sensitive detail. Over-sharing classified or commercially sensitive information is a red flag.
Frequently Asked Questions About Defence Interviews
What types of interviews and assessments does Defence use?
Defence mainly uses structured panel interviews, but may also use work simulations, assessment centres, technical tests, aptitude tests and online psychometric testing, depending on the role. SES processes often add leadership assessment and a presentation or strategic exercise.
What questions are asked in a Defence APS interview?
Questions are mostly behavioural and cover delivery, risk and governance, stakeholder engagement, leadership, communication and integrity. APS 6 questions focus on delivery and analysis, EL1 and EL2 on leadership, risk and working with ADF members, and SES Band 1 on strategic and enterprise leadership.
How much notice will I get for a Defence interview?
Defence says shortlisted applicants will be given two working days’ notice of interview details where possible, and candidates are assumed to be available from the closing date. Start preparing when you submit your application.
What security clearance do I need for a Defence APS job?
You generally need to be an Australian citizen and able to obtain and maintain the clearance stated in the job pack, which may range from Baseline to Negative Vetting or higher depending on the role. Clearance processing can take months.
Does Defence use the STAR method?
Yes. Defence panels expect structured behavioural answers, and STAR or STAR-L is the most effective format. Focus on your individual actions, avoid unexplained acronyms, and finish with a clear, ideally quantified result.
What is a Defence merit pool?
If you are found suitable but not selected for the immediate vacancy, you may be merit pooled. Defence can use the pool to fill similar roles and may share pooled candidates with other areas of Defence or other Commonwealth agencies.
Can former ADF members apply for Defence APS roles?
Yes. Former ADF members are common and valued applicants for Defence APS roles. The key is translating military experience into APS capability language and describing individual contribution rather than unit outcomes.
How should I prepare for a Defence SES Band 1 interview?
Prepare examples showing strategic direction-setting, delivery at scale, civil-military leadership, ministerial and parliamentary engagement, and enterprise stewardship. Review the APSC’s SES expectations, the 2026 National Defence Strategy and your target group’s priorities.
Updated: October 2026 Estimated read time: 14 minutes
DFAT Interview Questions: Examples by Role and Level (APS 6, EL1, EL2 and SES Band 1)
DFAT Is One of the Most Sought-After APS Employers. Its Panels Expect Evidence, Not Enthusiasm.
The Department of Foreign Affairs and Trade attracts strong fields for almost every vacancy it advertises. Candidates are drawn by the work itself: shaping Australia’s foreign policy, negotiating trade agreements, delivering development programs across the Indo-Pacific, and supporting Australians overseas.
That popularity creates a problem for candidates. Panels see many applicants who are genuinely interested in international affairs. Interest is not what separates them. What separates them is the quality of their evidence: how clearly they show judgement, influence and delivery at the level being advertised.
This guide sets out example DFAT interview questions for APS 6, EL1, EL2 and SES Band 1, explains what each question is really testing, and covers the role-specific questions that come up in policy, trade, development, consular and corporate roles. If you have already read our ATO interview questions guide, you will recognise the structure. The content of DFAT questions, however, is distinctly its own.
How Do DFAT Interviews Actually Work?
DFAT recruitment follows the same merit-based framework as the rest of the Australian Public Service, but with a few features that are specific to the department. Most processes follow four stages:
Written application. Usually a resume plus a pitch statement or responses to targeted questions. Word limits are set in the job pack and are strictly applied.
Assessment. Depending on the role and level, this may include a written exercise (such as drafting a brief or talking points under time pressure), an online assessment, or a work sample task. Bulk rounds may use additional stages.
Panel interview. A structured behavioural interview with a panel of two or three, usually including the hiring manager. Every candidate is asked the same core questions.
Referee checks and suitability. Referee reports are weighed alongside interview performance. Candidates must be Australian citizens and able to obtain and maintain the security clearance specified for the role. Many DFAT roles require a high-level clearance, and the clearance process can take months.
Two features shape DFAT interviews more than most agencies. The first is the written exercise: DFAT runs on clear, fast, accurate writing, and many processes test it directly. The second is mobility. Many DFAT roles, particularly generalist policy roles, come with the expectation of overseas postings during your career, and panels may ask how you would handle working in a different cultural, security or operational environment.
What Are DFAT Panels Assessing?
DFAT is an APS agency, so panels assess candidates against the capabilities in the APSC Integrated Leadership System (ILS) and the APS Work Level Standards, together with any role-specific selection criteria in the job pack. In practice, DFAT questions tend to cluster around five themes:
Judgement and analysis: making sense of complex, ambiguous or fast-moving situations and giving sound advice.
Communicating with influence: writing and speaking with precision, often for senior executives and Ministers, and sometimes for foreign counterparts.
Working relationships: building trust across agencies, with foreign governments, industry, NGOs and multilateral partners.
Delivery under pressure: meeting tight deadlines in crisis or high-tempo environments without compromising quality.
Integrity and discretion: handling classified and sensitive information, managing conflicts of interest, and applying the APS Values.
Integrity deserves special emphasis. DFAT staff work with sensitive information and represent the Australian Government abroad. Panels listen closely for discretion and sound ethical reasoning, even in questions that are not explicitly about integrity.
What Interview Questions Are Asked at DFAT APS 6 Level?
APS 6 officers at DFAT are expected to work with some independence, produce high-quality written advice, manage their own projects, and often supervise or guide less experienced staff. Questions test whether you can deliver complex work reliably with limited direction.
Example questions
“Tell us about a time you had to produce written advice for a senior audience on a complex issue under a tight deadline.”
The panel is testing your ability to distil complexity into clear, accurate advice. A strong answer shows how you gathered and verified information, structured the advice for the reader, handled any gaps in the evidence, and met the deadline. Mention how the advice was used or what decision it informed.
“Describe a situation where you needed to work with stakeholders from other agencies or organisations who had different priorities.”
DFAT work is rarely done alone. Panels want to see that you can identify different interests, find common ground and keep work moving. Strong answers show what you did to understand the other party’s position and how you secured agreement or managed the disagreement constructively.
“Give us an example of when you identified a risk or problem in your work before it escalated.”
This tests judgement and initiative at the APS 6 level. Show that you noticed the issue, assessed its significance, took appropriate action within your authority, and escalated where needed. Panels respond well to candidates who know when to act and when to brief up.
Other APS 6 questions you may face:
“Why do you want to work at DFAT, and what do you know about the department’s current priorities?”
“Tell us about a time you had to adapt quickly when priorities changed.”
“Describe how you have supported or guided a less experienced colleague.”
“How would you manage competing deadlines from two senior officers?”
What Interview Questions Are Asked at DFAT EL1 Level?
At EL1, DFAT expects you to lead a small team or function, take responsibility for the quality of its output, and provide advice that shapes decisions. The shift from APS 6 is significant: panels are no longer just assessing what you deliver, but how you lead others to deliver.
Example questions
“Tell us about a time you led a team through a period of high pressure or uncertainty.”
This is a core EL1 leadership question at DFAT, where crisis response and high-tempo periods are part of the job. A strong answer shows how you set priorities, communicated with the team, supported wellbeing, maintained quality and kept senior leaders informed.
“Describe a situation where you had to influence a senior stakeholder who initially disagreed with your advice.”
Panels are testing whether you can advocate for a position with evidence and tact. Here is how the difference between levels often shows up in answers:
An APS 6 answer describes preparing a well-researched brief, presenting it clearly, and accepting the senior officer’s decision.
An EL1 answer describes understanding why the stakeholder disagreed, reframing the advice around their concerns, bringing in supporting evidence or allies, finding a workable position, and managing the relationship so it stayed productive afterwards.
“Give us an example of when you had to manage underperformance or a difficult conversation with a team member.”
EL1s are accountable for their people. Panels want to see that you addressed the issue early, were fair and clear, offered support, documented appropriately, and stayed within policy. Avoiding the conversation is the weak answer here.
Other EL1 questions you may face:
“How have you ensured the quality of written products produced by your team?”
“Tell us about a time you had to represent your organisation’s position in a meeting with external parties.”
“How would you prepare yourself and your team for an overseas posting environment?”
“Describe a time you balanced a short-term demand against a longer-term priority.”
What Interview Questions Are Asked at DFAT EL2 Level?
EL2 roles at DFAT typically involve leading a section, managing significant budgets or programs, and providing high-level advice to SES officers and Ministers’ offices. Panels assess strategic judgement, organisational leadership and the ability to operate in politically sensitive environments.
Example questions
“Tell us about a time you provided advice on a highly sensitive issue where the right course of action was not clear.”
The panel is testing judgement at the strategic level. Strong answers show how you weighed competing interests (policy, legal, reputational, relationship and resource considerations), consulted appropriately, framed options and risks honestly, and took accountability for the recommendation.
“Describe how you have led change in a team or function, particularly where there was resistance.”
EL2s are expected to lead change, not just implement it. A strong answer explains why the change was needed, how you brought people with you, how you handled resistance, and what lasting improvement resulted.
“Give us an example of when you built or repaired a relationship with a key external partner to achieve an outcome for your organisation.”
At DFAT, partners may include foreign governments, multilateral organisations, other Australian agencies, industry or civil society. Panels want to see strategic relationship management: understanding the partner’s interests, investing in trust, and converting that trust into outcomes.
Other EL2 questions you may face:
“How do you ensure your section’s work aligns with the department’s strategic priorities?”
“Tell us about a time you managed a significant risk to a program, budget or reputation.”
“How have you developed future leaders in your team?”
“Describe a time you had to brief a Minister’s office or senior executive at short notice.”
What Interview Questions Are Asked at DFAT SES Band 1 Level?
SES Band 1 recruitment at DFAT is more intensive than lower levels. Processes often involve a senior panel, a detailed application, and may include psychometric or leadership assessment, a presentation or a strategic exercise. Panels assess enterprise leadership against the APSC’s SES expectations, including the SES Performance Leadership Framework.
Example questions
“Tell us about a time you set strategic direction for a division or major function and brought others with you.”
The panel is testing strategic leadership. Strong answers explain the context and why direction was needed, how you developed the strategy with others, how you communicated it, and how you measured whether it worked.
“Describe how you have managed a relationship with a Minister or their office through a contested or high-profile issue.”
SES officers must provide frank and fearless advice while remaining responsive to government. Panels look for candidates who can hold that balance with integrity, judgement and political awareness, without being political.
“How have you contributed to the leadership of an organisation beyond your own area of responsibility?”
This tests enterprise stewardship. Panels want SES officers who think about the whole department and the whole APS: workforce, culture, capability, integrity and long-term institutional health, not just their own division’s results.
Other SES Band 1 questions you may face:
“What do you see as the most significant challenges facing DFAT over the next five years?”
“Tell us about a time you led through a crisis with significant public or diplomatic consequences.”
“How do you create a culture of integrity and psychological safety in a large team?”
“Describe a difficult decision you made that was unpopular but right.”
What Interview Questions Are Asked for Popular DFAT Roles?
Beyond level-based questions, DFAT panels ask role-specific questions. These are examples drawn from the types of capabilities typically listed in DFAT job packs.
Policy and Geographic Desk Roles (APS 6 to EL2)
“How would you prepare a brief for a Ministerial meeting with a counterpart from a country in our region?”
“Tell us about a time you analysed a complex political or economic development and explained its implications.”
“How do you keep across developments in a fast-moving policy area?”
Trade and Economic Roles (APS 6 to EL2)
“Describe a time you represented an organisation’s interests in a negotiation.”
“How would you engage industry to understand the impact of a trade barrier?”
“Tell us about a time you translated technical or economic analysis into advice for a non-specialist audience.”
Development Program Management (APS 6 to EL2)
“Tell us about a program you managed and how you monitored its performance and value for money.”
“How have you managed a partner or implementing organisation that was not delivering to expectations?”
“Describe how you have applied risk, safeguards or fraud controls in program delivery.”
Consular and Crisis Response (APS 6 to EL1)
“Tell us about a time you supported someone in a distressing situation while following procedure.”
“How would you manage your wellbeing and your team’s during a prolonged crisis response?”
“Describe a situation where you had to manage public expectations about what you could do.”
International Law and Legal Roles (APS 6 to EL2)
“Tell us about a time you provided legal advice on an issue with significant policy implications.”
“How do you make complex legal analysis accessible to policy colleagues?”
“Describe a situation where legal risk and policy objectives were in tension.”
Corporate, Security and ICT Roles (APS 6 to EL2)
“How have you delivered corporate services to a geographically dispersed workforce?”
“Tell us about a time you improved a process while maintaining compliance and security requirements.”
“Describe how you have managed a vendor or contract to deliver an outcome.”
How Should You Structure Your DFAT Interview Answers?
DFAT panels expect structured answers. The most reliable formats are:
STAR: Situation, Task, Action, Result.
STAR-L: Situation, Task, Action, Result, Learning. The learning component is especially valuable at EL1 and above, where panels want evidence of reflection and growth.
A few principles matter more at DFAT than at many agencies:
Keep the situation short. Panels need enough context to understand the stakes, not a briefing on the country or policy issue.
Spend most of your time on actions. Use “I”, not “we”. The panel is assessing you.
Pitch to the level. An EL2 example should show strategic judgement and leadership, not just strong personal delivery.
Mind classification and discretion. Never share classified or sensitive details in an interview. Describe the situation at a level that conveys complexity without breaching confidentiality. Panels notice and value this discipline.
What Are the Most Common Mistakes in DFAT Interviews?
Leading with passion for international affairs. Interest is assumed. Evidence is what scores.
Over-explaining the policy context. Long descriptions of the country, conflict or trade issue use up time that should go to your actions.
Describing team outcomes. “We negotiated an outcome” tells the panel little about your individual contribution.
Pitching below the level. EL1 and EL2 candidates who give strong APS 6 answers often miss out.
Sharing sensitive details. Breaching confidentiality in an interview raises immediate concerns about judgement.
Not knowing DFAT’s current priorities. Read the department’s corporate plan and recent ministerial statements so you can connect your experience to what DFAT is trying to achieve.
Underestimating the written exercise. Many candidates prepare for the interview and neglect timed writing practice.
Frequently Asked Questions About DFAT Interviews
What types of interviews does DFAT use?
DFAT mainly uses structured behavioural panel interviews, where every candidate answers the same core questions and is assessed against the APS capabilities and the role’s selection criteria. Depending on the role and level, the process may also include a written exercise, online assessment, presentation or, for SES roles, leadership assessment.
What questions are asked in a DFAT interview?
Questions are mostly behavioural and focus on written advice, stakeholder engagement, judgement, leadership, delivery under pressure and integrity. APS 6 questions focus on analysis and delivery, EL1 and EL2 questions focus on leadership and influence, and SES Band 1 questions focus on strategic and enterprise leadership.
Does DFAT use the STAR method?
Yes. DFAT panels expect structured behavioural answers, and STAR or STAR-L is the most effective format. Keep the situation brief, focus on your individual actions, and finish with a clear result and, at EL1 and above, what you learned.
Does DFAT include a written test in its recruitment process?
Many DFAT processes include a written exercise, such as drafting a brief, talking points or a short analytical piece under time pressure. Check the job pack, and practise timed writing before your assessment.
What security clearance do I need to work at DFAT?
You must be an Australian citizen and be able to obtain and maintain the security clearance specified for the role. Many DFAT roles require a high-level clearance. The job pack states the required level, and the vetting process can take several months.
Will I be asked about overseas postings in a DFAT interview?
You may be, particularly for generalist policy roles, where overseas postings are part of the career path. Panels may ask how you would adapt to different cultural, security or operational environments, or how you would support a team in a challenging location.
How hard is it to get a job at DFAT?
DFAT roles are highly competitive and attract strong fields. Candidates who succeed usually have well-structured, level-appropriate examples, strong writing skills and a clear understanding of DFAT’s priorities.
How should I prepare for a DFAT SES Band 1 interview?
Prepare examples that show strategic direction-setting, ministerial engagement, crisis leadership and whole-of-organisation stewardship. Review the APSC’s SES leadership expectations, DFAT’s corporate plan and current foreign, trade and development priorities, and be ready for a presentation or strategic exercise.
The main difference is how you tailor the evidence in your resume to the employer’s role requirements and capability framework—not a universal difference in page layout. Australian Public Service (APS) applications may draw on the APSC Integrated Leadership System (ILS) and Work Level Standards, while state and territory employers use their own capability frameworks and recruitment instructions. Both generally benefit from clear formatting, relevant achievements and language that reflects the advertised role.
If you’re applying across federal and state government, don’t simply change the department name at the top of your resume. Review the position description, identify the capabilities being assessed and adjust your examples to show the scope, judgement and outcomes relevant to that role.
1. Capability frameworks: APS versus state government
APS: ILS, Work Level Standards and role requirements
The APSC Integrated Leadership System describes leadership behaviours and capabilities across APS classifications. The Work Level Standards help explain the expected work value at each classification. They are useful reference points, but your resume does not need to use ILS capability headings as its section headings unless the vacancy asks for that structure.
For example, an APS6 applicant might highlight independent judgement, stakeholder engagement and delivery of complex work. An EL1 applicant would generally need to show a broader leadership contribution, risk management and delivery through others, as appropriate to the position.
The practical test is whether your examples demonstrate the skills and responsibilities in the advertisement. If the application also requires a pitch or statement of claims, use that document to address the requested criteria directly. Our selection criteria and pitch support explains how these documents complement a resume.
State government: tailor to the jurisdiction and agency
State and territory employers have different frameworks. NSW applicants may need to demonstrate capabilities from the NSW Public Sector Capability Framework. Victorian public service applicants should review the relevant role’s capabilities and Victorian public sector guidance. Queensland applicants should follow the capability expectations and application instructions in the specific role description.
The key is not to copy every capability into your resume. Select achievements that provide convincing evidence against the focus capabilities or selection requirements for the job.
2. Resume formatting and applicant tracking systems
There is no single applicant tracking system used across the APS or every state government employer. Recruitment portals and document-processing capabilities vary by agency and configuration. Nor should applicants assume that an automated system makes the final merit decision: assessment processes depend on the employer and vacancy.
For reliable readability, a simple, accessible resume is usually the safest starting point:
Use clear headings such as Professional Summary, Key Skills, Employment History, Qualifications and Referees (where requested).
Present employment dates, titles and employers consistently.
Prefer a straightforward single-column layout; avoid decorative text boxes and complex tables when they add no value.
Use selectable text rather than an image-only or scanned resume.
Submit the file type requested in the advertisement, whether Word or PDF.
Include relevant terminology naturally, supported by real experience rather than keyword stuffing.
These choices help human assessors read your application and can reduce avoidable parsing issues. They do not guarantee an ATS score, successful parsing or an interview.
3. Resume length: follow the vacancy, not a universal rule
There is no across-the-board rule that APS6 or EL1 resumes must be three to four pages, or that state government resumes can always be longer. The right length depends on the employer’s instructions, the role’s seniority and how much relevant evidence you need to present.
As a practical guide, prioritise your most relevant and recent achievements. A concise resume that demonstrates complexity, responsibility and measurable outcomes is usually more persuasive than a long catalogue of duties.
Before submitting: check the advertisement for page limits, file formats, mandatory application questions, referee requirements and whether a separate pitch or statement is required.
4. How to adapt one resume for both APS and state roles
Suppose you managed a cross-agency project. The underlying achievement stays the same, but the emphasis can change.
APS-focused version: “Coordinated a cross-agency project, advised senior executives on delivery risks and implemented governance improvements that reduced reporting delays by 25%.”
State-government-focused version: “Led service-delivery improvements across regional teams, engaged operational stakeholders and reduced reporting delays by 25%, supporting more timely frontline decisions.”
These are illustrative examples, not claims about a real candidate. Neither version is inherently better. Use whichever emphasis most accurately reflects your experience and matches the advertised requirements. Never change facts or inflate responsibility simply to match framework terminology.
If you’re moving from a private-sector role into government, our private-to-public-sector application support can help you translate commercial experience into relevant public-sector evidence.
5. APS versus state government resumes: quick comparison
Feature
APS applications
State government applications
Capability alignment
Role requirements, potentially informed by APSC ILS and Work Level Standards
Relevant state or territory capability framework and role requirements
Resume structure
Clear professional history and evidence of achievement
Clear professional history and achievement evidence
Formatting
Follow vacancy instructions; simple accessible layouts are a strong default
Follow vacancy instructions; simple accessible layouts are a strong default
Page length
Vacancy-specific; no universal 3–4-page cap
Vacancy-specific; no universal 4–5-page allowance
Supporting documents
May require a pitch, statement of claims or selection criteria
May require capability responses, targeted questions or other statements
What matters most
Demonstrated merit against the role
Demonstrated merit against the role
Frequently asked questions
Can I use the same resume for APS and state government jobs?
You can reuse a strong master resume, but tailor the summary, relevant achievements and capability language for each advertised position. Keep your underlying facts consistent.
Do APS resumes need to be ATS-friendly?
A clear, machine-readable document is sensible, but no format guarantees ATS performance. Follow the agency’s file requirements and make the resume easy for a person to assess.
Is a one-page pitch compulsory for APS jobs?
No. Some APS vacancies request a one-page pitch, while others specify different lengths, statements or application questions. Always follow the individual advertisement.
Should I use ILS headings in my APS resume?
Not automatically. Use headings that make your career evidence easy to scan. Draw on ILS or Work Level Standards where relevant to the vacancy, particularly when choosing and describing achievements.
How long should a state government resume be?
Use any stated page limit. Otherwise, include enough relevant evidence to demonstrate suitability without repeating duties or unrelated career history.
Get expert help tailoring your government resume
A strong government resume does more than list previous responsibilities. It helps a selection panel understand what you delivered, how you exercised judgement and why your experience matches the position.
At PS Interview Coach, we help applicants align their resumes and supporting statements with the actual requirements of APS and state government roles. Explore our government resume writing services or book a free strategy call to discuss your next application.
Updated: October 2026 Estimated read time: 12 minutes
APS Resume Format 2026-27: The Exact Layout, Fonts, Margins and Length Government Panels Expect
Why Does APS Resume Format Matter More Than Design?
An Australian Public Service resume has one job: to give a selection panel fast, accurate evidence that you can perform at the advertised classification level. It is not a marketing brochure, and it is not judged on visual flair.
Two readers see your resume. The first is the agency’s e-recruitment system (many APS and state agencies use platforms such as PageUp), which extracts your details into a candidate record. The second is the selection panel, who are often reading dozens of applications in a short window and assessing every candidate against the same criteria under the merit principle.
Creative layouts work against both readers. Multi-column designs, sidebars, tables, text boxes, icons and skill-rating bars can scramble when a system parses them, and they slow a panel member down when they are scanning for evidence. A plain, well-structured document does the opposite: it parses cleanly and lets your achievements do the work.
The APSC’s own Cracking the Code guidance is also clear that, in most cases, a CV alone will not win an APS job. It works alongside your pitch or selection criteria response. That means your resume should be built to support your written claims, not repeat them.
What Are the Technical Rules for an APS Resume?
These settings give you a document that parses reliably, prints cleanly for panel bundles, and stays stable across different versions of Microsoft Word.
APS and state government resume formatting specifications
Element
Recommended setting
Layout
Single column only. No tables, text boxes, columns, sidebars, icons or graphics.
File type
Microsoft Word (.docx), unless the advertisement asks for PDF.
Font
One family throughout: Calibri, Arial, Aptos or Georgia.
Your name
18 to 22 pt, bold.
Section headings
14 pt, bold, using Word’s built-in Heading styles.
Body text
11 pt (never below 10 pt).
Line spacing
1.0 to 1.15, with 6 pt spacing after paragraphs.
Margins (all sides)
2.54 cm (Word’s “Normal” setting). Never narrower than 2 cm.
Header and footer distance
1.27 cm from the page edge.
Bullet points
Standard round bullets only. Avoid custom symbols, arrows or ticks.
Why Word (.docx) Instead of PDF?
Word files are the most reliably parsed format across government e-recruitment systems, and panels sometimes need to compile or annotate applications. Submit a PDF only when the advertisement asks for one. If the system accepts both and gives no preference, .docx is the safer choice.
Why 1.15 Line Spacing Rather Than 1.5?
Line spacing of 1.5 looks generous on screen but consumes roughly a third more space, which quickly pushes you over a page limit. Spacing of 1.0 to 1.15 with a small gap after each paragraph gives the same breathing room without costing you a page of evidence.
Use Word’s Built-In Heading Styles
Apply Heading 1 or Heading 2 styles to section titles rather than simply making text bold and larger. Built-in styles help parsing software identify sections, improve accessibility for screen reader users, and make the document easier to reformat if an agency imposes a different limit.
How Long Should an APS Resume Be?
The APSC notes that most CVs it sees fall somewhere between two and six pages. Within that range, length should be driven by your target level and the relevance of your experience, not by how much you have done.
Recommended APS resume length by classification
Target classification
Recommended length
APS 3 to APS 5
2 to 3 pages
APS 6 to EL1
3 to 4 pages
EL2
4 to 5 pages
Senior Executive Service (SES)
Up to 5 pages
The job advertisement always overrides these ranges. Many APS and state agencies now specify a strict limit, commonly two pages. Exceeding a stated limit tells the panel you cannot follow instructions, and some agencies will only read up to the limit.
Most candidates find it easiest to keep a longer “master” resume and cut it down for each application, removing older or less relevant roles first.
What Should Go in the Header and Footer of an APS Resume?
Keep headers and footers functional and minimal. Never place tables or text boxes inside them.
First page header: leave blank. Your name and contact details belong in the main body of page one.
Header on pages 2 onwards: your full name and phone number in 9 pt, right-aligned. In Word, use “Different First Page” to set this up.
Footer on every page: page numbering in the format “Page X of Y”, centred or right-aligned.
Page numbering matters because applications are often printed or merged into panel bundles. “Page 2 of 3” tells a panel member immediately if a page has gone missing.
One important caution: some parsing systems ignore headers and footers entirely. Never put contact details only in the header, or the system may record your application without them.
What Is the Recommended Structure for an APS Resume?
Use this order. It front-loads the information panels look for first: who you are, what level you work at, and whether you meet any eligibility requirements.
Contact information: full name, phone, email, city or location, Australian citizenship status, and security clearance level if you hold one.
Professional summary: three to four lines covering your field, level and primary value.
Core capabilities: four to six capabilities aligned to the target role.
Employment history: reverse chronological order, most recent first.
Education and qualifications: degrees, diplomas and relevant certifications with completion years.
Clearances and professional memberships: if not already listed in your contact block.
Referees: two professional referees, ideally including your current or most recent direct manager.
Contact Information and Citizenship
Australian citizenship is a standard condition of engagement for most APS roles, and many roles require a security clearance. Stating both at the top saves the panel from searching for eligibility information. List your clearance level and whether it is active (for example, “Baseline (Active)” or “NV1 (Active)”). Do not include clearance reference numbers or other identifying numbers.
Professional Summary
Write the summary in the silent first person, which means dropping the “I”. For example, “Lead policy development and stakeholder engagement across…” rather than “I lead policy development…”. Name your field and level, and anchor the summary in public sector value rather than generic adjectives such as “results-driven” or “passionate”.
Core Capabilities
Choose four to six capabilities that mirror the language of the position description and the relevant capability framework. For APS roles, that means the APSC Integrated Leadership System (ILS) and the APS Work Level Standards. Keep each capability to a short heading plus one line of evidence. A bare list of keywords does little for a panel.
Employment History
For each role, include:
Job title and APS classification, or a brief scope indicator for non-APS roles (team size, budget, or reporting line)
Department, agency or organisation, and branch or division
Start and end dates in month and year format
A two to three line role overview
Key responsibilities (three to five bullets)
Key achievements with measurable outcomes (two to four bullets)
Roles older than 15 years can usually be removed or condensed into a single “Earlier career” line unless they are directly relevant. Acting roles at a higher level should be listed clearly with their duration, because they are strong evidence of readiness for promotion.
The difference between a responsibility and an achievement is where most APS resumes fall short. Panels are looking for what changed because you were there, at a level of complexity that matches the classification. If you need help converting duties into level-appropriate evidence, see our APS ATS resume and application services.
Referees
Provide two professional referees with their current title, organisation, phone number and email. Choose people who can speak to the capabilities in the role, not just your technical output. Let your referees know in advance and send them the position description.
What Should You Leave Off an APS Resume?
Australian public sector recruitment is assessed on merit, so personal details unrelated to the work should be omitted:
Photograph
Date of birth or age
Gender and marital status
Full home street address (city or suburb is enough)
Tax file number, driver’s licence number or any other identification number
Salary history or salary expectations
Hobbies and interests, unless directly relevant to the role
“References available on request”
If you are applying through the APS RecruitAbility scheme, that opt-in is usually handled in the application form rather than on your resume.
Does the Resume Format Change for State Government, AFP, ADF or NDIA Roles?
The technical layout rules above apply across Australian public sector recruitment. What changes is the capability language you align to:
Federal APS agencies (including the NDIA, Services Australia, ATO and Department of Defence civilian roles) use the APS ILS and Work Level Standards.
The AFP uses its own Work Level Standards, which correlate to the ILS, and maps its band structure to APS classifications.
NSW Government roles align to the NSW Public Sector Capability Framework.
Victorian Public Service roles use VPS classifications and key selection criteria set out in the position description.
Queensland Government roles commonly use AO classifications and the Leadership competencies for Queensland.
State government advertisements are often more prescriptive about resume length and cover letter format, so read the applicant information pack closely. For tailored support with state roles, see our state government interview coaching.
Copy the template below into a blank Word document. Set the font to Calibri 11 pt and margins to 2.54 cm, then apply the sizes shown in square brackets. Replace every placeholder with your own evidence.
[11 pt] Public sector policy professional with [number] years of experience at [level, e.g. APS 6] in [field, e.g. regulatory policy]. Lead [core function 1], [core function 2] and [core function 3] across [context, e.g. federal and state stakeholders]. Known for [specific value, e.g. turning complex legislation into clear advice for senior executives and Ministers].
[14 pt Bold] CORE CAPABILITIES
Policy and Strategy: Research complex issues, analyse data and develop evidence-based policy advice.
Stakeholder Engagement: Build collaborative partnerships across Commonwealth, state and territory agencies.
Written Communication: Draft ministerial briefs, Senate Estimates material and governance reports.
Project Delivery: Track and report on program milestones, risks and budgets.
[14 pt Bold] EMPLOYMENT HISTORY
[11 pt Bold] Policy Officer | APS 6
[11 pt] Department or Agency Name | Branch or Division
Month YYYY – Present
Role overview: Two to three lines on your mandate, who you report to and your team’s primary objective.
Key responsibilities:
Manage the end-to-end delivery of [project or program name].
Coordinate consultation with internal and external stakeholders to support regulatory alignment.
Provide advice and draft briefs, submissions and executive documentation.
Key achievements:
Led delivery of [initiative], reducing [measure] by [percentage or amount].
Drafted [number] high-priority ministerial briefs cleared by senior leadership within agreed timeframes.
[11 pt Bold] Program Support Officer | APS 5
[11 pt] Department or Agency Name | Branch or Division
Month YYYY – Month YYYY
Role overview: Two to three lines on the environment and your core function.
Key responsibilities:
Supported senior management with risk monitoring, milestone tracking and secretariat duties.
Interpreted program guidelines to give accurate, timely advice to service delivery partners.
Key achievements:
Identified a bottleneck in the compliance workflow and redesigned the process, improving turnaround by [percentage].
[14 pt Bold] EDUCATION AND QUALIFICATIONS
[11 pt Bold] Bachelor of Arts (Public Policy) | YYYY
[11 pt] University Name, Location
[11 pt Bold] Diploma of Government | YYYY
[11 pt] Registered Training Organisation Name
[14 pt Bold] PROFESSIONAL REFEREES
[11 pt Bold] Referee Name 1
[11 pt] Current Title | Department or Agency Name
P: 0400 000 000 | E: referee1@email.gov.au
[11 pt Bold] Referee Name 2
[11 pt] Current Title | Department or Agency Name
P: 0400 000 000 | E: referee2@email.gov.au
A template gives you the right structure. It cannot tell you which of your examples will land at the level being assessed, or how to describe your achievements so a panel recognises EL1 judgement rather than APS 6 delivery. That is where most applications are won or lost.
What Are the Most Common APS Resume Formatting Mistakes?
Using a two-column template. Sidebars for skills or contact details often parse out of order or disappear.
Building the layout with tables or text boxes. They look tidy in Word and break in parsing software.
Ignoring the stated page limit. A four-page resume against a two-page limit is a poor first impression.
Listing duties instead of achievements. A copied position description tells the panel what the job was, not how well you did it.
Writing for the wrong level. Examples need to reflect the complexity, autonomy and decision-making described in the Work Level Standards for the target classification.
Repeating the pitch word for word. Your resume and pitch should complement each other, with the resume supplying context and the pitch supplying your strongest evidence.
Mixing fonts and styles. Inconsistent formatting signals a lack of attention to detail, which panels notice.
Unexplained gaps. A one-line explanation (study, caring responsibilities, travel) is better than leaving a panel to guess.
Frequently Asked Questions About APS Resume Format
What is the best resume format for APS jobs?
The best format is a single-column, reverse chronological Microsoft Word document with no tables, text boxes, columns or graphics. Use one professional font such as Calibri or Arial at 11 pt, 2.54 cm margins, and clear section headings built with Word’s Heading styles. This layout parses cleanly in e-recruitment systems and is fast for selection panels to scan.
How long should an APS resume be?
As a general guide, aim for 2 to 3 pages at APS 3 to APS 5, 3 to 4 pages at APS 6 to EL1, 4 to 5 pages at EL2, and up to 5 pages at SES level. The APSC notes most CVs fall between two and six pages. Any page limit in the job advertisement always takes priority, and many agencies now set a two-page limit.
Should I submit my APS resume as a Word document or PDF?
Submit a Word (.docx) file unless the advertisement asks for PDF. Word documents parse most reliably in government e-recruitment systems and can be compiled into panel bundles easily.
What font and size should I use on an APS resume?
Use one font family throughout, such as Calibri, Arial, Aptos or Georgia. Set body text at 11 pt, section headings at 14 pt bold, and your name at 18 to 22 pt bold. Never go below 10 pt for body text.
Should I include a photo or date of birth on an APS resume?
No. Australian public sector recruitment is based on merit, so leave off your photo, date of birth, age, gender and marital status. Include only information relevant to assessing your capability and eligibility for the role.
Should I put my security clearance and citizenship on my resume?
Yes. State your Australian citizenship and your security clearance level and status (for example, “NV1 (Active)”) in the contact section at the top of page one. Many APS roles require citizenship and a clearance, so this helps panels confirm eligibility quickly. Do not include clearance reference numbers.
Do APS agencies use applicant tracking systems to reject resumes?
Many agencies use e-recruitment platforms such as PageUp to collect and manage applications, and these systems parse your resume into a candidate record. Shortlisting decisions are generally made by a selection panel assessing candidates on merit, but a resume that parses badly can arrive incomplete or jumbled, which weakens your application before a person reads it. A clean single-column format avoids that risk.
Is a state government resume format different from an APS resume?
The layout rules are the same: single column, Word format, professional font and reverse chronological history. The difference is the capability language. Align your resume to the relevant state framework, such as the NSW Public Sector Capability Framework or Queensland’s Leadership competencies, and follow any length or format instructions in the applicant information pack.